Home > Sapim Nipples > Brass
Sort By
Page of 1
14 Gauge Brass Polyax 14 Gauge Brass Polyax

The round shape of the head of the polyax nipples works like a ball-joint between the rim and the nipple ensuring a better spoke/nipple line. Polyax nipples are offerred in 12, 14, and 16 mm.

15 Gauge Brass Polyax 15 Gauge Brass Polyax

The round shape of the head of the polyax nipples works like a ball-joint between the rim and the nipple ensuring a better spoke/nipple line. Polyax nipples are offered in 12 and 14mm.

14 Gauge Brass Inverted 14 Gauge Brass Inverted

Inverted nipples are used in special rims.  Because the whole nipple remains in the rim, it gives a better aerodynamic profile as well as a better design. Due to its special use, Sapim offers inverted nipples in 8,5, 10 and 12 mm.

13 Gauge Brass Polyax Reduction (13G spoke into 14G nipple) 13 Gauge Brass Polyax Reduction (13G spoke into 14G nipple)

The round shape of the head of the polyax nipples works like a ball-joint between the rim and the nipple ensuring a better spoke/nipple line. Polyax nipples are offerred in 12, 14, and 16 mm.

14 Gauge Brass Hex Head 14 Gauge Brass Hex Head

Hexagonal head nipples allow to take higher torque without damaging the four spans of the nipple. Because truing is done from the head side that has a larger diameter, it can take more pressure. Hexagonal nipples are offered in 12 and 14mm.

13 Gauge Brass Round Top - 14mm 13 Gauge Brass Round Top - 14mm

Nipple used with 13G (2.3mm) spokes.

12 Gauge Brass Round Top - Brass (used with 12G (2.6mm) spokes pre-threaded from factory. 12 Gauge Brass Round Top - Brass (used with 12G (2.6mm) spokes pre-threaded from factory.

Nipple used with 12G (2.6mm) spokes pre-threaded from factory.

12 Gauge Brass Round Top - Brass (For use with 12G spokes cut and re-threaded with US threads.  (TPI-56)) 12 Gauge Brass Round Top - Brass (For use with 12G spokes cut and re-threaded with US threads. (TPI-56))

Nipple used with 12G (2.6mm) spokes cut and re-threaded with US threaded. (TPI-56)

11 Gauge Brass Round Top - TPI-44 11 Gauge Brass Round Top - TPI-44

Nipple used with 11G (2.9mm) spokes.

14 Gauge Brass Double Square Head 14 Gauge Brass Double Square Head

Developed for special truing machines, the nipple is able to be trued
using either an internal or external spoke wrench.  Nipples are
available in 16 and 18mm.  (16mm similar to standard 12mm and 18mm
similar to standard 14mm)